Compucessory 55251 Série Guide D'installation Et Manuel D'utilisateur page 5

I.2.1 Connecting to Telephone
Unplug the handset from your telephone base unit and insert it to the
Handset Modular Jack (14). Use the phone cord provided with RJ-11
modular plug on both ends to connect the control unit to your
telephone. Plug one end of the cord to your base unit (A) and the
other end to the Phone Input Modular Jack (15) on the back of the
unit. (See illustration below)
I.2.2 Connecting to Computer (not necessary when using with
telephone only)
Connect this unit to your computer with the audio cable provided.
The color of the plugs is already-color coded in accordance with the
universal standard of line-in and line-out. In another words, the
speaker output line is green, and the microphone input line is blue for
the computer.
C O N N E C T I N G T O T H E U N I T:
Green plug goes to "Line-In" Jack (also green)(3).
Blue plug goes to "Line-Out" Jack (also blue) (4).
C O N N E C T I N G T O T H E C O M P U T E R S O U N D C A R D :
Green plug goes to "Line-Out" or "Speaker Out" Jack (also green).
Blue plug goes to "Line-In" Jack (also blue).
E N G L I S H
3