Climadiff AIRPUR3 Notice D'utilisation page 29

7. TROUBLE SHOOTING
You can solve many common air purifier problems easily, saving you the cost of a possible service call. Try
the suggestions below to see if you can solve the problem before calling the servicer.
Appliance doesn't work
The appliance is not efficient
Significant noise
Coming out nasty smell
The reminder of replacing filter is still flashing
after user replaced a new one
NOTE: all pictures in the manual are for explanation only. The actual shape of the device you purchased
may be slightly different, but the operations and functions are the same.
PROBLEM POSSIBLE CAUSE

Not plugged in

Not press the "SPEED" (1/2/3) button on
the control panel

The circuit breaker tripped or a blown fuse

Check if nothing is blocking air inlet/outlet

Make sure that there is no heat source in the
room

Strainer are too dirty or need to be changed

Is there anything stuck on the fan in the air
outlet?

Please set a lower grade of wind speed if the
noise is too loud, or set low grade of wind
speed when using in bedroom at night.

It is the normal phenomenon that the machine
emits the smell of plastic for the first time.

The machine will emit nasty smell if the filter is
dusty, in this case, please clean or replace the
filter.

If the burning smell emits from the machine,
please unplug the power socket and contact
with buyer or customer service

Please press the Filter button for 7s to reset
the machine and the life counter of the filter
will start.
29