EAL APA 16506 Manuel De L'opérateur page 5

Batterie-Trainer 12 V 500 mA
CONTENTS
1. PROPER USE OF THE PRODUCT _____________ 5
2. SCOPE OF DELIVERY ___________________ 5
3. SPECIFICATIONS ______________________ 5
4. EXPLANATION OF SYMBOLS _______________ 5
5. SAFETY NOTES _______________________ 6
6. OPERATING INSTRUCTIONS _______________ 6
6.1 PREPARATION OF THE BATTERY ____________ 6
6.2 CONNECTING THE BATTERY MAINTENANCE DEVICE 6
6.3 PROTECTION FROM CONNECTION TO THE ________
WRONG POLE _______________________ 6
6.4 CHARGING OF BATTERY _________________ 6
6.5 REMOVING THE CHARGER ________________ 6
7. MAINTENANCE AND CARE ________________ 6
7.1 MAINTENANCE ______________________ 6
7.2 CARE ____________________________ 7
8. NOTES REGARDING ENVIRONMENTAL PROTECTION 7
9. CONTACT INFORMATION __________________ 7
WARNING
Read the operating instructions through
carefully prior to initial use and observe
all of the safety notes! Not observing such
may lead to personal injury, damages to
the device or your property! Store the
riginal packaging, the receipt and these
instructions so that they may be consul-
ted at a later date! Prior to initial use
check the contents of the packaging to
ensure that they are in perfect condition
and complete!
1. PROPER USE OF THE PRODUCT
The battery maintenance device is designed to ensure that
the vehicle battery remains fully charged when the vehicle is
not used for a longer period of time. The battery maintenan-
ce devices is suitable for the following lead-acid batteries:
• Wet batteries (WET), lead-acid batteries (fl uid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fi breglass fl eece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The battery maintenance device may not be used as jump-
start assistance. First charge the battery of the vehicle com-
pletely and remove the charger before starting the vehicle.
The battery maintenance device may not be used as direct
current source or for other purposes.
The battery maintenance device is designed for use in a
protected environment at temperatures of -15 °C to +40°C.
This device is not designed to be used by children and
people with limited mental capacities or those without
experience and/or knowledge. Keep children away from the
device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also
includes the observance of all information in these operating
instructions, particularly the observance of the safety
instructions. Any other utilisation is considered to be
contrary to the intended purpose and may lead to mate-
rial damages or personal injuries. EAL GmbH assumes no
liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
• 1x Battery maintenance device
• 1x Operating instructions
3. SPECIFICATIONS
Battery voltage:
Battery capacity:
Charge current:
Input:
Output:
Long mains cablel:
Long charger cable:
Weight:
4. EXPLANATION OF SYMBOLS
Complies with EC directives
Labelled electrical products may not be disposed
of in the household waste
Devices with this symbol may only be operated in
the house (dry environment)
Protective insulation housing (safety class II)
130 °C
Fuse, switches off at 130 °C
Read the operating instructions
Fail-safe safety transformer
Output voltage to maximum 50 Volt
F
Protection against ingress of foreign
bodies ø > 12 mm
12 V
5 - 50 Ah
500 mA
230 Volt AC, 50 Hz, 14 W
12 Volt DC, 500 mA
approx. 1.00 m
approx. 1.00 m
0.330 kg
5