HP Smart Wi-Fi Display Manuel De L'utilisateur page 18

Windows Vista
On your computer, click Start > Network. The Network folder opens.
1.
Click Add a wireless device. The Add a wireless device to the
2.
Network screen is displayed.
Click I want to add a wireless device or computer that is not on the
3.
list, using a USB flash drive.
Click Add the device or computer using a USB flash drive.
4.
From the list that appears, select your network name (SSID), then click Next.
5.
If the User Account Control screen appears, click Continue (you may need
6.
to repeat this).
Connect your USB flash drive to the computer, confirm that the drive name is
7.
displayed, then click Next.
Once this step is complete, remove the USB flash drive from the computer, then
8.
click Close.
Plug the USB flash drive into your HP Smart Wi-Fi Display to finish the set up of
9.
the Wi-Fi connection.
16