Silverline 263965 Mode D'emploi page 8

GB
Troubleshooting
Problem
No function when On/Off Trigger
Switch (5) is operated
Excessive splashing while
mixing
Insufficient mixing results
Decreased performance, visible
sparking from Motor Vents (8),
intermittent failures
8
Possible cause
No power
Defective On/Off Trigger Switch
Speed setting too fast
Mixing paddle incompatible with compound being mixed
Wrong speed settings
Mixing paddle incompatible with compound being mixed
Carbon brushes worn
Solution
Check power supply clicks in a locked position
Replace the On/Off Trigger Switch at an authorised Silverline service centre
Select a slower speed
Fit a suitable mixing paddle
Try different speeds, to determine best mixing performance
Fit a suitable mixing paddle
Replace the carbon brushes at an authorised Silverline service centre