Setting Up Your Receiver - Insignia NS-R2000 Guide De L'utilisateur

Remote control
1
2
3
4
5
6
7
8
9
10
Item Description
1 POWER ON button
2 Numeric keypad
3 PRESETS button
4
TUNING/PRESET
5 FM MODE button
6
VOLUME
7 SPEAKER A button
8 Input selector buttons
9 DIMMER button
10 SLEEP button
11 STANDBY button
12 MEMORY button
13
TUNING/PRESET
14 TUNING/PRESET MODE button
15 MUTE button
16 SPEAKER B button
17
TREBLE/BASE
4
11
12 12
13
14
15
16
17
button
/ buttons
button
/ buttons
www.insignia-products.com
Insignia NS-R2000 Stereo Receiver

Setting up your receiver

Unpacking your receiver
Your box includes the following:
• One receiver
• One remote control with two batteries
• This User Guide
• AM and FM antennas
Warning
Do not plug the AC cord into the AC outlet until all
connections are completed.
Note
Be sure to observe the color coding when
connecting audio and speaker cords.
Note
Make connections firmly and correctly. Failure to
do this can cause loss of sound, add noise to the
sound, or damage your receiver.
Locating your receiver
• Install your receiver on a stable flat surface.
Position your receiver so that it can have a
direct line of sight to the remote control.
• Do not expose your receiver to extremes of
temperature or humidity.
• Avoid placing your receiver on a hot surface
such as on top of other hot running
equipment. Make sure that there is adequate
ventilation to your receiver.
Caution
Do not install this receiver in a confined space such as a
bookcase.
Note
Connect the AC cord only after the speakers, antenna, and all
optional equipment have been connected. Never make or
change any connections with the power turned on.
Connecting the antennas
1
Item Description
1 FM (indoor) antenna
2 FM (outdoor) antenna
3 AM loop antenna
3
2
4