F- TECHNICAL SPECIFICATIONS
F- TECHNICAL SPECIFICATIONS
Camera
Resolution
Compatibility
Motion detection/Night vision
Memory card
Video recording
Angle of view
Operating frequency
Max. transmit power
Weather-resistant
Adaptor
Power
G- TECHNICAL ASSISTANCE
G- TECHNICAL ASSISTANCE
Troubleshooting assistance
Problem encountered
If adding the camera
fails
- Check the power supply is properly connected.
- Check that you are connected to wi-fi when entering the wi-
fi password and do not include spaces.
- Check that you have entered the wi-fi password correctly.
- Check that your router is connected to the internet.
- Make sure you have sufficient bandwidth.
- Check that your smartphone is connected to the same
network entered in the app.
- Check that the wi-fi network you are attempting to connect
to is on 2.4 GHz and not 5 GHz.
- Pairing must be completed within 3 m of the wi-fi router.
- Check that the antenna is properly screwed in before
installation. Do not force it.
- Contact your internet service provider to check your router's
settings (UPNP activated, MAC address filtering deactivated,
SSID not hidden, DHCP activated, VPN or Proxy deactivated)
1080p
iOS, Android
Yes
SD micro from 4 to 128 Go (not supplied)
Yes (on SD micro card)
85°
2412-2472 MHz
< 100 mW
IP65
Model identifier : SA-121000EU
Input voltage : 110-240V AC
Input AC frequency : 50/60Hz
Output voltage : 12V DC
Output current : 1A
Output power : 12W
Average active efficiency : 83,33%
No-load power consumption : 0,07W
Solutions
EN
25