Central Command; Operation; Technical Data - Becker Centronic VarioControl VC180-II Notice De Montage Et D'utilisation

The Centronic multi-channel transmitters have a central command (all LEDs
light up). If all the channels of the transmitter are selected, it is possible to op-
erate all of the assigned receivers/groups simultaneously. The central com-
mand must be programmed separately in the remote-controlled socket so that
it can be executed.
Function
Switching on/off
Timer function
Rated voltage
Switching current
Degree of protection
Class of protection
(dependent on correct assembly)
Permissible ambient temperature
Radio frequency
Dimensions

Central command

Operation

Power ON/OFF button
Transmitter up-button
Transmitter stop button
Transmitter down-button
Switching time for up
Switching time for down
off

Technical data

230-240 V AC / 50 Hz
16 A / 230-240 V AC with cos
IP 20
II
-20 to +35°C
868.3 MHz
approx. 112 x 68 x 49 mm
Operation
= On
= Off
= On
= Switch on
= Switch
=1
23 - en