Becker Centronic VarioControl VC180-II Notice De Montage Et D'utilisation page 21

Deleting all transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten (see Overwriting the master trans-
mitter).
Press the programming button on the master transmitter for 3 seconds.
▻ The radio socket confirms.
Re-press the programming button on the master transmitter for 3 seconds.
▻ The radio socket confirms.
Re-press the programming button on the master transmitter for 10 seconds.
▻ The radio socket confirms.
► All transmitters (except the master transmitter) have been deleted from
the receiver.
Deleting individual transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten (see Overwriting the master trans-
mitter).
Press the programming button on the master transmitter for 3 seconds.
▻ The radio socket confirms.
Now press the programming button of the transmitter to be deleted for 3
seconds.
▻ The radio socket confirms.
Then re-press the programming button of the transmitter to be deleted for 10
seconds.
▻ The radio socket confirms.
► The transmitter is now deleted from the receiver.
21 - en