Declaration Of Conformity - Comunello WL Mode D'emploi

f) The Customer cannot claim compensation for indirect damage, loss of profits, loss of production and in
any case it cannot claim compensation for an amount that exceeds the value of the supplied components or
products. All transport costs for Products that have been repaired or to be repaired, although covered by the
Conventional Warranty, shall be charged to the Customer.
g) No external work carried out by Comunello technical staff is covered by the Conventional Warranty.
h) Specific amendments to the Conventional Warranty conditions described herein can be defined by the
parties in their commercial contracts.
i) The Court of Vicenza (Italy) shall be the place of jurisdiction for any dispute which will be settled according
to the Italian laws.

7. DECLARATION OF CONFORMITY

The company Fratelli Comunello S.p.A. based in Via Cassola 64, 36027 Rosà (VI) Italy
Declares that the equipment described below
Description: Anemometer WL
is in compliance with the provisions set down in the following directives:
2014/30/EU (EMCD Directive)
and that all the rules and/or technical specifications shown below have been applied:
EN 61000-3-2:2002
EN 61000-3-3:1995 + A1(2002)
EN 61000-4-2:1996 + A1(1998) + A2(2001)
EN 61000-4-3:2003 + A1(2002)
EN 61000-4-4:1996
EN 61000-4-5:1995 + A1(2001)
EN 61000-4-6:1997 + A1(2001)
EN 61000-4-11:1995 + A1(2001)
and the following amendments
Rosà, 22/01/2018
Luca Comunello
FRATELLI COMUNELLO S.p.A. Legal Representative
8