Comunello WL Mode D'emploi page 13

2
4
CAUTION: For correct operation, please remember that the sensor must be positioned near the sunshade it
protects and in an area exposed to sun and wind.
The articulated arm should be parallel to the ground and the blades should be turned downwards (Fig. 3).
a. Remove the cover (Fig. 1)
b. Attach the device to the wall using the provided wall plugs (Fig. 3/4)
c. Position the articulated arm horizontally with the blades turned downwards (Fig. 3)
CAUTION: If the articulated arm is not perfectly horizontal there may be problems detecting the wind speed.
3
4