D-Link GO-RT-AC750 Guide D'installation page 5

PRODUCT SETUP
WEB-BASED SETUP
PC
Router
Modem
Modem
Router
PC
Modem
Router
WELCOME TO THE D-LINK SETUP WIZARD
GO-RT-AC750
Step 1
Position your GO-RT-AC750 near your Internet-connected modem
and PC. Keep the router in an open area for better wireless
coverage.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled 'INTERNET' on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled '1'
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the GO-RT-AC750 through Wi-Fi, go to your computer
or mobile device's Wi-Fi settings and select the network (ex: dlink-
A8FA). Enter Wi-Fi password (ex: akbdj19368) on the included Wi-Fi
Configuration Note.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
'http://dlinkrouter.local./' and follow the onscreen instructions to
configure your GO-RT-AC750. Use 'Admin' as your username and
leave the password blank to configure manually.
5