VONROC WB501 Série Traduction De La Notice Originale page 5

1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to follow
the safety warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the sa-
fety warnings and the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non observance
of the instructions in this manual.
Maximum permissible load 150 kg.
Do not exceed the maximum
permissible load.
Use the workbench on flat and level
ground.
Support long workpieces, for example
with another workbench.
Make sure the workpiece is locked
securely in a stable position.
Do not stand on top or use as ladder.
SPECIFIC SAFETY INSTRUCTIONS
• Make sure that all screws, nuts and bolts are
fitted and securely tightened.
• The plastic feet should be fitted to the ends of
the legs to protect against slipping. Note: the
plastic feet are not symmetrical. The "highest"
part should be facing the outer corner of the
leg.
• Check clamping device for smooth movement.
• Do not use the clamping workbench as seating,
as a step stool, step ladder or other stand aid.
• Do not exceed rated load capacity or clamping
power.
• Heavy loads must be placed down carefully
onto the work bench.
WWW.VONROC.COM
• Distribute weight evenly across the worktop. Do
not apply an unbalanced load that could cause
the unit to tip over.
• Support long work pieces, for example with
another workbench.
• Only set up on solid, level surfaces.
• All four legs must be in contact with the ground,
use shims if necessary.
• Be sure the workpiece is properly secured
whilst working.
• Only push down with your hands to stabilise the
worktop.
• Do not brace table with your feet.
• Keep out of the reach of children. Keep the
product in a safe place.
• Do not use any attachments or accessories not
recommended by the manufacturer of the product.
The use of attachments or accessories not recom-
mended can result in serious personal injury.
• Do not expose to rain or use in damp locations.
• Save these instructions. Refer to them frequently
and use them to instruct others who may use
this accessory. If you loan someone this acces-
sory, loan them these instructions also to prevent
misuse of the product and possible injury.
2. PRODUCT INFORMATION
Intended use
The Clamping Workbench is designed and intended
for domestic use, to clamp items for machining
such as sawing, painting or cleaning, sanding,
polishing and gluing in home and garden environ-
ments and for hobby purposes. This workbench is
not a toy. Children should be supervised at all times
to ensure they do not play with the workbench. This
workbench is not developed for professional use.
The Clamping Workbench must be handled, cared
for and maintained in accordance with these in-
structions. Any other use is deemed improper and
may result in damage to property or personal injury.
TECHNICAL SPECIFICATIONS
Model No.
Max. permissible load
Working height
Opened size
Weight
EN
WB501XX
150 kg
755 mm
775 x 520 x 635 mm
4.8 kg
5