boso bosotherm 4000 Mode D'emploi page 14

bosotherm4000_4100_5sp_407
Use
When using the device for the first time, check whether the
light bulb is screwed tightly into place. Always ensure that
the infra-red lamp is safely positioned on an even surface.
During exposure to the rays, the distance to the lamp
should be chosen in such a way that it feels pleasant.
Always close your eyes when exposing your face to the
rays! The recommended duration of treatment is
approx. 12 minutes.
14
26.04.2007 14:34 Uhr Seite 14
Cleaning /
replacing the light bulb
Before cleaning and before replacing the light bulb, the
device must be switched off, unplugged, and must
have cooled down.
The infra-red lamp can be cleaned with a damp cloth. Do
not use any aggressive cleaning or scouring agents.
Ensure that no water gets into the inside of the device. Only
use the device again when it is completely dry.
When replacing the light bulb, make sure that you use the
same type of light bulb with the same power output. Your
stockist can supply replacement light bulbs.