IFM Electronic efector200 OE Notice De Montage page 5

Installation
1. Retro-reflective sensor
Fix prismatic reflector / reflective
tape in desired position. Align the
photocell (safe switching of the
amplifier must be guaranteed)
and fasten it to a mounting
bracket.
Maximum range is only possible
with precise alignment.
2. Diffuse reflection sensor
Align the photocell (safe switching
of the amplifier must be guaran-
teed) and fasten it to a mounting
bracket.
Maximum range is only possible
with precise alignment.
Operation
Check the safe functioning of the photocell.
Maintenance: Keep the lens of the sensor free from soiling.
5