WARNING:
from the electrical outlet, make sure the appliance and oil are
completely cooled.
~ Oil retains its temperature for a long period after use.
~ Do not attempt to carry or move the deep fryer while the oil is hot.
Remove the lid and basket.
-
Wait for the fryer to cool, lift out the Control Box Assembly &
-
Heating element.
Remove the oil pot and pour out the oil. It is recommended to filter
-
the oil after each use if you are to re-use the oil again.
After removing the oil pot, the fryer can be divided into several
-
separate assemblies to clean.
The oil pot and the body can immerse into water to clean.
-
The Control Box & Heating Element should be wiped clean with
-
absorbent paper towels. Then use a damp cloth and a mild soap
to clean.
WARNING:
-
Element into water to clean.
Dry thoroughly all parts.
-
Note: Do not use abrasive scrubbing brushes or chemical
-
cleaners to clean the unit.
Once removed, drain the oil into a suitable container. The housing
-
and the tank can be washed by hand in hot soapy water.
Make sure the tank and case are completely dry before putting the
-
tank back into the case.
VI – CLEANING THE DEVICE
Before cleaning the fryer, make sure it is unplugged
Do not immerse the Control Box & Heating
EN-34