AEG SRP 4354 BT Mode D'emploi page 52

English
52
Cleaning and maintenance
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps during Check the disc for
playback. fingerprints, dirt or
scratches.
The unit does The unit is blocked
not work. and "hangs".
No audio signal The device is not
via the Bluetooth registered with the
connection audio source.
Volume too low
The loudspeak- Pairing does not
ers cannot be work
connected.
Audio source is
switched off
Bluetooth is
switched off at the
audio source.
Bluetooth version
is not supported.
Music tracks are Random playback
played back via is activated.
USB in the wrong
sequence.
Not all titles are The maximum
played back. number for titel
selection is limited
to 999.
Technical Specifications
Model: ...........................................................................SRP 4354 BT
Voltage supply: ..........................................................230 V ~ 50 Hz
Battery operation: .................................. 8 X 1.5 V Type UM1/R20
Output power: .................................................................40 W RMS
Power consumption:.................................................................40 W
Net weight: ...............................................................................3.6 kg
Radio:
Solution
Ensure that the disc is
Bluetooth
inserted with the label
facing upwards. Bluetooth support: ........................................................V2.0 + EDR
Range: ................................................................... approx. 15 Meter
Transmission frequency: ......................................................2.4 GHz
or operate the device
Protocols: ....................................................................A2DP/AVRCP
with the mains lead.
Check the disc for
The right to make technical and design modifications in
fingerprints, dirt or
the course of continuous product development remains
scratches.
reserved.
Disconnect the mains
This device has been tested according to all relevant current
plug for approximate-
CE guidelines, such as electromagnetic compatibility and low
ly 5 seconds. Then
voltage directives, and has been constructed in accordance
switch the unit back
with the latest safety regulations.
on.
Check whether a
connection exists. Re-
register the device
with the audio source,
if necessary.
Increase the volume
Disposal
on the speaker
Increase the volume
Meaning of the "Wheelie Bin" Symbol
on the audio source.
Take care of our environment, do not dispose of electrical
Check whether the
applicances via the household waste.
audio source supports
the A2DP protocol.
Dispose of obsolete or defective electrical appliances via
Switch on the audio municipal collection points.
source
Please help to avoid potential environmental and health
Switch on the Blu-
impacts through improper waste disposal.
etooth function in the
You contribute to recycling and other forms of utilization of
audio source.
old electric and electronic appliances.
Use a different play-
back unit.
Your municipality provides you with information about col-
lecting points.
Turn off the program-
ming functions.
Frequency ranges: ...............................FM 87.5 ~ 108.0 MHz