AEG SRP 4354 BT Mode D'emploi page 50

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
English
50
Playing back music via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To remotely control the source, the playback device has to
support the AVRCP profile (Audio Video Remote Control
Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Press the FUNCTION button repeatedly, until "PAIRING"
is shown on the display.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "SRP 4354" will show in
your player as a selection.
NOTE:
Only one player can be connected to the device. If
the device is already connected to another player, the
device will not appear in the BT selection menu.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
Pay attention to the indicators on your player to check
whether the devices are successfully connected to each other.
For operation, please refer to the section "Description of the
Operating Buttons".
If possible, adjust the volume of the external unit to a com-
fortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems during repairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re-
ceives a call, the music will be interrupted. The sound is
played back by the speaker depending on the mobile
phone. To transfer the conversation to your mobile tele-
phone, please refer to the popup on the mobile phone
display. After you have terminated the phone call, the
devices will be connected to each other again. You may
have to restart playback.
Description of the Operating Buttons
You may temporarily stop playback and start again. The
elapsed playing time will flash on the display. Pressing the
button again will continue playback from the same position.
TUN.-
/ TUN.+
During playback:
With the button you may skip to the next or next but one
track, etc. Press and hold this button to quickly search music.
You may operate the
button as followed:
Press 1 x =
Starts current track again from the beginning.
Press 2 x =
Skips back to previous track.
Keeping the button pressed will start a music
search run.
During radio mode:
Tune the desired radio station.
/MO/ST.
The CD or the songstops.
During FM radio mode:
Switch between STEREO and MONO.

Publicité

Table des Matières
loading

Table des Matières