Maintenance And Cleaning - Bosch GAS 20 L SFC Professional Notice Originale

OBJ_BUCH-1321-007.book Page 12 Thursday, June 1, 2017 11:45 AM
12 | English
Action
Transport position
Switching On and Off
Connecting a power tool to the
vacuum cleaner; remote auto-
matic switching
Regulating the airflow
Blower function
Semi-automatic filter cleaning
(SFC)
Changing the folded filter
Cleaning the float
Selecting Accessories
Troubleshooting
Switch the vacuum cleaner off immedi-
WARNING
ately as soon as foam or water comes
out, and empty the container. Otherwise, the vacuum clean-
er can become damaged.
 The vacuum cleaner is equipped with a float. When the
maximum filling height is reached, the suction capacity
is reduced. Set the On/Off switch to position "0" and
empty the container.
 If the suction force is so high that the connected power
tool adheres too firmly against the working surface,
regulate the airflow.
 When the vacuum performance decreases, activate the
semi-automatic filter cleaning.
1 609 92A 3VY | (1.6.17)
Figure Please observe
7
8
9
10
11
12
13
14
–
 If a fault (e.g. a filter damage) occurs, the vacuum
cleaner must be switched off immediately. The fault
must be repaired before resuming operation.

Maintenance and Cleaning

 For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
A dust-technical inspection is to be carried out at least once
every year by the manufacturer or an instructed person, e. g.
for damage of the filter, tightness against leakage of the vacu-
um cleaner and function of the control/monitoring unit.
For category L vacuum cleaners that were in contaminated
environments, the exterior as well as all machine parts should
be cleaned or treated with sealants. When performing mainte-
nance and repair work, all contaminated components that
Page
176
176
177 – 179
179
180
181
182 – 183
184 – 186
187
Bosch Power Tools