LAS 11790 Manuel De L'opérateur page 5

box, place a metal bracket over two of the holes. Insert the screws, with washers, through the holes of the metal bracket and the base of the box.
Fit the other metal bracket from below onto the screws and add the washers and nuts, but do not tighten yet. Align the box and then tighten the
screws. Your tow-bar-mounted box is now ready for use.
Mounting on a V-shaped tow-bar
6. Maintenance and care
The tow-bar box itself is maintenance free and does not need any maintenance with the exception of occasional cleaning with soft, dry cloth.
Do not use aggressive cleaning agents or chemical solutions since otherwise the surfaces will be damaged.
Lubricate the lock occasionally with graphite or a resin-free penetrating oil.
Notes regarding environmental protection
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials can be recycled. You make an important contribution to protecting our environment by recycling, material utilisation or other
forms of reusing waste equipment!
Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Mounting on a square tie-rod crosswise / lengthwise
info@eal-vertrieb.com
www.eal-vertrieb.com
5