Publicité
Les langues disponibles
Les langues disponibles
TRAILER TOW-BAR-MOUNTED BOX, LOCKABLE
CONTENTS
1.
PROPER USE OF THE PRODUCT
2.
SCOPE OF DELIVERY
3.
SPECIFICATIONS
4.
SAFETY NOTES
5.
OPERATING INSTRUCTIONS
5.1 ASSEMBLY
6.
MAINTENANCE AND CARE
7.
NOTES REGARDING ENVIRONMENTAL PROTECTION
8.
CONTACT INFORMATION
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damages to the device or your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date!
Prior to initial use check the contents of the packaging to ensure that they are in perfect condition and complete!
1. Proper use of the product
The tow-bar-mounted box is attached to the tow-bar (V-shaped or square tie-rod) of a car. The tow-bar-mounted box is not suitable for attaching
to round tie-rods. It can be used for storage and for the transportation of lashing straps, load securing nets, tools, fire extinguishers and other
similar accessories.
2. Scope of delivery
1x tow-bar-mounted box with two keys
4x screws with hexagonal head, M8 x 140
4x nuts M8
4x washers
4x metal brackets 83 x 30 x 5 [mm], drilling distance: 58,5 mm
1x Instructions for use
3. Specifications
External dimensions:
Internal dimensions:
Volume
Dead weight:
Maximum size of tow-bar profile:
4. Safety notes
•
Keep children away and do not allow children to operate this device!
•
Only use this product as intended!
•
Do not manipulate or dismantle the device!
•
For your own safety, only use accessories and spare parts that are stated in these Instructions or are recommended by the
manufacturer!
•
Never drill holes in the tow-bar of your trailer.
•
Observe the support load of your trailer coupling when loading the tow-bar-mounted box.
•
Always lock the tow-bar-mounted box before starting your journey.
5. Operating instructions
5.1 Assembly:
Place the box on the tow-bar of your trailer. Locate a suitable position for the tow-bar box, no tail lights or reflectors may be covered, and
the hand brake lever and the support wheel crank must be freely accessible. Pay attention to ensure that the lid of the box can be opened
fully. When you have determined the position for the tow-bar box, mark the base of the box with the positions required to drill the holes for
the fixture screws. The fixture screws must be positioned on right and left and as close to the profiles of the tow-bar as possible. Remove the
tow-bar-mounted box from the tow-bar of your trailer and drill the holes for the fixture screws. Place the box back in the selected position. In the
4
56 x 25 x 27 [cm]
48 x 18 x 24 [cm]
23 litres
3.750 kg
125 x 50 [mm] (Height x Width)
4
4
4
4
4
4
5
5
5
Publicité
