Detection Function Setting - Detectalia V100 Manuel D'utilisation

Notes: the adjusting screw has been set to a good position before shipping from the factory, so the
user is no need to do the adjustment when they receive the machine. Only when after a long time
usage, it may need to do some adjustment.

6. Detection function setting

The users can choose the detection function according to their needs.
6.1 UV detection
• Check the banknote with UV feature.
• During the counting, if the machine stops counting and showing "UV ALARM" in the display, the user should take away the last banknotes
from the stacker and check. Then the user can press "RESET"to continue counting or take all the banknotes from the stacker to count again.
• The UV level range is from "0" to "9". "0" means the UV detection is off. "1" is the lowest level, and "9" is the highest level. The user can press
"+1/10" to do the setting and press "RESET" to confirm.
6.2 MG detection
• Check the banknote with MG feature.
• During the counting, if the machine stops counting and showing "MG ALARM" in the display, the user should take away the last banknotes from
the stacker and check. Then the user can press "RESET" to continue counting or take all the banknotes from the stacker to count again.
• The MG level range is from "0" to "9". "0" means the MG detection is off. "1" is the lowest level, and "9" is the highest level. The user can press
"+1/10" to do the setting and press "RESET" to confirm.
V100
11