Night Mode; Sleep Timer; Care And Maintenance - Dyson Pure Hot+Cool Manuel D'utilisation

Sleep timer

Your appliance will turn off
automatically after the selected
amount of time.
To set the time: Press the button
to scroll through the time options.
Once activated press the Sleep timer
button once to see the time selected.
To cancel the Sleep timer: Press the
Sleep timer button twice.

Night mode

In Night mode, your appliance
will continue to monitor and
respond to changes in air quality
and temperature, but only using
its quietest settings – and with its
LCD screen dimmed.
10
1-4
AUTO mode
1-10
Manual
Care and
maintenance
To always get the best performance from your
appliance, it is important to regularly clean it and check
for blockages.
Changing your filters:
The display on your appliance and app will indicate
when to change your filters.
Order new filters on the Dyson Link app or
www.dyson.com. Your new filters will come with
instructions, go online for further support and videos.
Do not use your appliance without the filters in place.
Unplug your appliance from the mains electricity supply
before cleaning or changing filters.
Error codes:
If your appliance shows an error code, try turning it off
and then on again. If this does not clear the error code
contact Dyson Customer Care.
For further information and support about the care and
maintenance of your appliance and replacing the filters
go to the Dyson Link app or
Online:
www.dyson.com