Behind-the-seat mounting:
Mount the brackets to the bottom of the
subwoofer fi res
enclosure using the supplied smaller
into the back of
screws. Securely attach the
the seat.
enclosure to the vehicle
with the supplied
larger screws.
Pro Tip: You are one
ZX Mono-Amplifi er and a few
cables away from a complete, high-quality
system with rock-solid bottom end, as only
available from KICKER! The KICKER ZX line of
mono-amplifi ers makes it easy to upgrade the
bassline of your stock or aftermarket source
unit. Please ask your dealer about KICKER ZX
amplifi er upgrades.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
IMPORTANT SAFETY WARNING
To avoid potential injury or possible death from forward movement of the enclousre during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are soley
responsible for securely fastening the enclosure in your vehicle.
stillwaterdesigns
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine
KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum
performance.
3