Chacon 34046 Mode D'emploi page 50

b) If pairing was successful, check the battery
voltage of the main unit and transmitter. Low
voltage will result in product failure.
3. No alarm sounds after a detection
a) Check if the low battery indicator is flashing
(please replace the batteries immediately).
b) If the unit is armed and set to HOME mode and
the PIR sensor detects an intrusion, the alarm will
not sound. The PIR sensor is disabled in HOME
mode. Check if the main unit is installed correctly.
7. Add a device to your existing alarm
We have created a 100% compatible alarm system
to meet your needs. Here, we offer accessories that
can work alone but also as a kit. This allows you
to personalise your alarm and to associate several
accessories but also several alarms between them.
For example, when a person triggers the opening
detector, all your alarms will sound. You can deacti-
vate your alarm using the code units, remote control
or the remote keyboard.
EN