Publicité
Les langues disponibles
Les langues disponibles
5. Reset pairing
In order to reset your entire alarm, remove the
batteries from your device. Then press and hold the
learning button (See central alarm manual). When
you reinsert the batteries, you will hear two «beeps»
indicating that the reset was successful.
6. Problem solving
1. False alarms from the main unit
a) Check that there are no animals near the motion
detector.
b) In hot weather, moving shadows may also
activate the alarm. Also ensure that the detector
is not installed near a radiator or heat source.
c) Check that there are no devices with strong
electromagnetic fields near the door/window
sensor. Strong electromagnetic fields can cause
false alarms.
2. The main unit doesn't receive a signal from the
transmitter
a) Check if the pairing between the transmitter and
the main unit was successful.
EN
Publicité
