Chacon 34046 Mode D'emploi page 47

ment of the main unit.
2. Press and hold the learn button until you hear a
«beep». The unit enters pairing mode.
3. Press any button on the remote keypad. You
will hear a «beep» sound to indicate successful
pairing.
4. To exit pairing mode, press and hold the learn
button for 3 seconds. You will hear a double
«beep».
NOTE: A maximum of 32 transmitters can be paired
to a main unit.
3. Setting up the personal code
Once you have placed your batteries, you have 15
seconds to choose a four-digit code. If you have
not had time to enter your personal code, the code
1234 will be saved by default.
Note: Each time you install batteries, you will need
to set up your 4-digit code again.
4. Functionality of the keypad
a) HOME Mode: Enter your 4-digit code,
then press the «1» button. You will hear
EN