Srhythm Soulmate Série Manuel D'utilisation page 3

Parameters:
True Wireless Stereo Earbuds S2,Hi-Fi sound quality and dual-mode Bluetooth
Load impedance
Frequency range
Battery Life (Charging Box)
Water proof level
Bluetooth version
Sensitivity
Charging Time(Charging Earbuds)
Charging Time(Charging Box)
Battery Capacity
Operating voltage
Weight
* Above data are all from the laboratory and for reference only.
Enter Pairing Mode:
Before Pairing:
Tear off protective film and
throw them away. If low bat-
tery, please charge.
32Ω
2.402G-2.480G
500 times
IPX5
V5.0
- 94 dBm
1-1.5 Hours(Mobile Charging)
1-1.5 Hours(Wired Charging)
Earbuds 45mAh Charging Box 450mAh
DC5V
10g for Single Earbud
Open the charging box cover for the first time,and it is avail-
able to enter Bluetooth pairing mode after full of
charging.The LED indicators on earbuds will flash blue light 3
times and you will hear a voice prompt of "Power On" from
the earbuds.
Start Pairing:
Open the "Bluetooth" function on your phone,search for "S2"
and click it to connect.The LED indicators on earbuds will
flash blue once for every 3 seconds,and you will hear a voice
prompt of "connected" from the earbuds that means your
Bluetooth pairing is successful.(While earbuds pairing,the
LED indicator on one earbud flashes red and blue alternate-
ly,while the other one earbud flashes blue slowly,and there is
a voice prompt of "pairing" from earbuds,which indicates
that earbuds are ready for connecting to a mobile device.)
Automatic Pairing:
Normally your earbuds will automatically pairing with your
mobile next time once ever paired successfully.Sometimes
perhaps still need you to click the Bluetooth pairing name S2
on your mobile.
*After taking out earbuds from the charging box,if it is not
used about three minutes,earbuds will automatically shut
down to save power.Touch and hold the touchpad for 2-3
seconds to turn earbuds on.
*If connect with other devices,please firstly disconnect or
cancel the pairing in the Bluetooth control panel on your
phone,your S2 will enter standby state after disconnecting.
64g for Charging Box
Protective film
English
2