KITCHEN CREW 943354 Mode D'emploi page 17

The display and symbols light
up properly after the
appliance is switched on, but
the ring does not heat up.
After plugging in the mains
plug and using the on/off
button to turn the appliance
on, the display and symbols
are not lighting up.
The flow of heat stops during
cooking.
Check that you are using
suitable cookware with
induction-compatible
material, and that the
appliance is in default mode.
Check that the power cord
is properly plugged into the
wall outlet. Also make sure
that the button, the cable
connection, the power supply
and the fuse are not
damaged.
Check whether the oil is
burning due to use of
excessively high temp-
eratures when frying or
deep-frying foods and also
check if the ambient temp-
erature is too high.
Determine whether the
ventilation openings are
blocked or dirty. If the
appliance has been running
for more than 2 hours since
being turned on, its overheat
protection may have been
activated. Disconnect the
hob from the power supply,
then reconnect the power
supply and restart the
appliance.
17