Product Description - CAMPAGNOLA LINX Manuel D'utilisation Et D'entretien

The machine's plate is placed on the machine as indicated in the following figure.
DIRECTIVE 2012/19/EU ONLY APPLIES TO ELECTRIC AND ELECTRONIC TOOLS
AND/OR DEVICES (EEE).
THEREFORE, EVEN IF THE CE PLATE/LABEL SHOWS THE
SYMBOL OF A CROSSED-OUT BIN, THIS DIRECTIVE DOES NOT APPLY TO PNEU-
MATIC PRODUCTS NOT EQUIPPED WITH AN EEE.
3.2

Product description

The pneumatic chain pruner is a tool used for cutting and pruning orchards, vineyards, citrus and olive trees and all
trees in general.
It consists of a lightweight alloy motor body.
It is only intended for use on telescopic or fixed poles, fitted with control handle.
It may be supplied with:
 with 1/4" 1.3 chain on 8" bar;
 with 1/4" 1.1 chain on 8" carving bar:
Check that the package of the tool contains:
- Use & Maintenance Manual.
- Set of keys.
IMPORTANT!
Unpacking and assembly completion must be performed on a flat surface in an area with sufficient
space to move the tool and packaging while using suitable tools.
Use and Maintenance Manual – Translation of Original
Instructions Rev.: 01, Date 16/09/2021
Page 31