English 07 - eufy Security Entry Sensor Guide De Démarrage Rapide

LED
Sensor LED indicator color
Flashing white
Flashing white (Once)
Flashing red (Once)
FAQ
1. What battery does the Entry Sensor use?
Entry Sensor uses a CR123A battery with 3V output.
2. How long does the battery last?
One CR123A battery usually lasts up to 2 years, but depends on the usage.
Please visit our official website to download the user manual: www.eufylife.com
06 English
Entry Sensor status
Adding to HomeBase
Sensor detects an open/close activity
Sensor battery is low or disconnects from
HomeBase
Safety
his product complies with the radio interference requirements of the
T
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For
the declaration of conformity, visit the Web site https:/ /www.eufylife.com/.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C - 40°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

English 07