Ce Marking - Corradi ERMETIKA Manuel Utilisateur

®
Ermetika , Ermetika
Demolition
To ensure sustainable use of natural resources, the product is designed to be demolished in an environmentally friendly way at the end of its life
cycle.
The components can be separated and disposed of in a specific way, and they are not considered as dangerous. Consequently there are no
particular indications for scrapping and disposal, only the existing local regulations for the disposal of the components at the time of demolition.
Disassembly must be carried out by qualified personnel, in order to avoid any risk.
Before working with any parts connected to the mains, it is mandatory to disconnect the product.
During demolition it is necessary to separate plastic parts and electrical components (represented by a symbol with crossed out
wheelie bin), which must be sent to separate waste collection in compliance with current regulations.
As regards the metal mass of the product, simply separate the steel parts from those made of other metals or alloys for proper
recycling through fusion.

CE MARKING

The CE marking is present inside the protection cassette
on the motor side
12 of 16
®
XL
Unique identification code
of the product-type
CORRADI SRL - USER MANUAL
Facsimile of the CE marking
Ermetika®, Ermetika® XL
Name or identifying mark
and registered address of
the manufacturer
Reference
no. of the
D.o.P.
Corradi S.r.l., via M.Serenari 20 Castel Maggiore (BO), Italy
MACROGRUPPO_AAAA.MM
Unique identification code
of the product-type
External use in buildings and other constructions
Intended use as defined
Wind load resistance: See D.o.P.
by the European standard
Total solar energy transmittance gtot:
applied
Level or Class of
performance declared
No. of the European
Regulation applied as
indicated in the OJEU
MODEL
SERIAL NUMBER
See document "Fabrics Gtot"
8
Last 2 digits of the year in which
the CE marking was applied for
the first time
Rev.13 - 09.2018