CANVAS LIFT/LOWER PROCEDURE WITH LOCKS AND ANEMOS MANUAL DRIVE
A
Manual operation
- (A) To lock the awning,
lower it using the winding handle until the terminals are positioned under the guide locks; move the latches across against the guides, then lock them by tightening the knobs slightly (Callout X).
- (B) Move the canvas back up until it is suitably tensioned.
- (C) To release the awning,
turn the winding handle in the opposite direction, lowering the terminal; release the latches by unscrewing the knobs by one turn and move them across away from the guides (Callout Y) nd lock them by
tightening the knobs slightly .
- (D) Wind up the awning by turning the winding handle in the opposite direction.