PRODUCT DESCRIPTION
1
2
3
1
Control panel
2
Air outlet
3
Front Cabinet
ASSEMBLY
Filling the water tank
Place the air cooler on a level ground and follow the steps
below:
1.
Rotate the door holder to horizontal position, and then
pull the water tank out around 2 / 3.
2.
Fill the tank with clean water.
4
Rear Cabinet
5
Air inlet
6
Water tank
REMARQUE
!
4
5
3. Push the tank into the main body completely, and then
fasten the door holder.
6
Ice crystal box (not edible)
1.
Filling the ice crystal box with appropriate amount of
water,and place it into a freezer until completely
frozen.
2.
Add to water tank as required. (Two ice crystal boxes
have been included so that you can add ice
continuously).
The water should never be lower than
1.)
the "min" line or higher than the
"max" line while using the cooling
function.
Use only clean tap water or purified
2.)
water to ensure longer product life.
Never fill tank with hot water (40 °C
and above).
48 | 49
GB