Eplacement Of The Focus Engraved Ring; Feet Into Meters ) - Thales angenieux OPTIMO 17-80 Manuel Utilisateur

THALES ANGENIEUX
4.3 R

EPLACEMENT OF THE FOCUS ENGRAVED RING

- Remove the focus rubber ring (2)
- Put acetone on the head of the focus ring fixations screws Picture 7
- Remove the 3 screws picture 8
- Remove the lens bracket (6) and the 2 screws (5) Picture 9
- Remove the focus engraved ring in feet Picture 10
- Install the focus engraved ring in meters Picture 11
- Mount the 3 screws and tighten them to contact to prevent to have a too much stiff focus
torque Picture 11
- Put locking varnish 286642 on the 3 head of the focus ring fixations screws
- Mount the lens bracket (6) with the 2 screws (5) Picture 12
- Mount the focus rubber ring (2)
Focus engraved
ring in feet
Picture 7
Picture 10
Edition : Avril 2008
screw
screw
Picture 8
Focus engraved
ring in meters
Picture 11
(
FEET INTO METERS
Lens bracket
Lens bracket
screw
11
)
screw
Picture 9
screw
Picture 12
Reference : 304 881 B