Toolland DT20016N Mode D'emploi page 4

• Do not leave the sprayer unattended whilst pressurized.
• Clean and rinse the pressure sprayer thoroughly after each use
by spraying 1 to 2 litres of clear water. Do not dispose of your
clean-up water into the sewer system but spray onto the treated
crops.
• Lubricate the moving mechanic parts such as the suction tube
inside the pump with some petroleum jelly.
3. General Guidelines
•
Refer to the Velleman
•
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will
void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
•
Nor Velleman Group nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising from the
possession, use or failure of this product.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
V. 01 – 18/10/2021
®
Service and Quality Warranty on the last pages of this manual.
pump cap
pump with piston
pump lever
pump rod
DT20016N
5
6
7
4
control valve
lance
nozzle
©Velleman Group nv