Beurer MC3000 Mode D'emploi page 19

Starting the massage
Interrupting the programme
> Press the on/off button
The massage mechanism then returns to the start
position and switches off.
Switching off the massage chair
Once the massage programme is complete,
the massage function switches off automatically.
Following selection of a new massage area, the
massage runs for another 15 minutes.
Caution!
Do not use the device for longer than 15 minutes at
a time otherwise the device could overheat. Allow the
device to cool for at least 30 minutes before using it
again.
> Plug the mains plug into the socket
> Fold the back cushion backwards over the back rest
> Sit on the massage chair
> Assume the desired upright or flat position
Press the on/off button
>
The LED button lights up.
> Press the desired massage button
The massage starts up. The LED button lights up.
The selected programme runs for 15 minutes and then switches off.
The massage chair then switches to standby mode.
During the massage, you can switch off the device at
any time using the on/off button
The operating display flashes.
19
.