Joyetech eGo AIO Notice D'utilisation page 3

How to Use:
Power on and off: Press the button for 5 times in quick succession, the button light will flash 5 times
to indicate eGo AIO is ready for use. In the same way, eGo AIO will be powered off after 5 presses.
Vaping: Press the button and inhale.
Charging: Simply charge eGo AIO by connecting it with a computer or a wall
adapter via USB cable. When it's fully charged, the button light will go out.
E-juice filling:②
Press the cap to unscrew the atomizer cap, then inject the liquid directly into
the cambered slot which is of 2ml e-juice capacity.
NOTE: 1. Please don't overfill beyond the Max mark to avoid overflow when reassemble.
2. Please drip a few drops of e-juice to the atomizer head before its first use to avoid dry burn.
4 English
Atomizer Head replacement:③
With childproof lock, please press the cap to unscrew the atomizer cap, the
atomizer head(with natural cotton) is located on the cap, just unscrew it and
replace and clean. (NOTE: Please do not wash the atomizer head with water.
Simply scrub it with alcohol cotton or clean dry cloth.)
Turn off or shift indicate light: In power-off condition, long press the fire button
until the indicator light is on, then press the button to shift among the color of red,
yellow, green, blue, indigo, white, purple or light-off.
Adjustment of Air Inflow:
Rotating the ring on the atomizer cap clockwise or counterclockwise to adjust the
English 5