Adam Hall SWU400T Manuel D'utilisation page 4

1. Foreword
Thank you for buying our wind-up stand.
This stand is designed for use in event technology.
Our user manual will explain to you how to use the stand properly.
Please pay particular attention to the safety information.
Make certain that you have read and understood the user manual before transporting, assembling, beginning to
use, and performing maintenance on the stand.
1.1. LiabiLity
This user manual was created with the greatest possible care.
The information, data, notes, and instructions contained herein were current as of going to press. Due to the
continuous refinement of the product, however, this user manual may evidence slight deviations with regard to
performance data or other features.
This user manual is subject to change or additions at any time without notice, especially if it contains technical
errors or typographical errors.
Claims for modification of products already delivered cannot be asserted on the basis of the descriptions and
other information in this user manual or the graphical depictions.
Our warranty and liability for defects in the product supplied, including this user manual, shall be governed solely
by the provisions of the purchase agreement, to the exclusion of further claims.
1.2. warranty
We warrant that this user manual was produced in accordance with the essential technical and functional parameters
of the technical product supplied.
We undertake no liability for defects and damage that arise due to improper use or failure to observe this user
manual.
In particular, warranty and liability claims in the even of personal injury and property damage are excluded if they
are attributable to one or more of the following causes:
• use for purposes other than those intended by the manufacturer.
• improper transport / improper setup.
• operation of the product with defective safety devices or improperly attached or non-functional safety and
protective devices.
• failure to observe the information in the user manual when transporting, operating, and performing mainte-
nance on the product.
• unauthorized modification of the product.
• Removal of parts of the equipment and/or Installation of spare parts or additional devices
that were not supplied or specified by us.
• failure to comply with the inspection periods specified by the accident prevention regulations.
• improper repairs.
• catastrophic events due to external influences or force majeure.
• Expendable parts are not covered by the warranty.
4