LENCO Xemio-768 Mode D'emploi page 10

 To search for new Bluetooth Device;
 Before you search for new device, please disconnect the current paired
device. For better result, turn the paired Bluetooth receiver to power off.
 Choose "Search Device" the device searching mode will start again for
new device(s) name list to choose again;
 Choose new found and wanted Bluetooth receiver device for pairing.
b. Device's List
 Choose "Device's List" to enter into the paired device list, you can
disconnect or un-pair it, also can re-connect those devices if it's in
operating range.
 In device's list, choose the device's name and choose your desired
function "Disconnect" or "Connect / Unpair" as you want. However,
make sure that you have disconnected the linking device before connect
the new wanted device.
 Reconnect a pair Bluetooth device;
 Automatically connecting: every time when turn "On" the Bluetooth
transmission function, it will automatically reconnect to the last
connected device if the receiver device is still in reconnect mode.
However, some Bluetooth receiver device may need to turn it "Off and
On" again for reconnecting. If not;
 Manual connecting: some Bluetooth receiver device may need to
reconnect manually; turn it power Off and On again for reconnecting. Or;
 Choose "Device's List" again by using
choose the known device and choose "Connect" for reconnecting.
c. Folders &songs
 choose "Folders & songs" to enter into music list, you can direct select
the wanted folder and song file for play and transmitting by using
and
d. BT Now Playing
 Choose "BT Now Playing" to return now playing interface.
 In "BT Now Playing" interface, you can selects; Previous / Next song file,
Play / Pause the song and adjust the Volume Up/Down by using the
, and
e. Shuffle
Choose "Shuffle" > choose "off / On" to disable and enable the
shuffle play function as you desired by using the
To Recall the Bluetooth's Submenu / Exit Bluetooth Function
 Press
button, to recall the Bluetooth's submenu. Or,
 Pressing
confirm. Choose "Yes" to exit by using
Bluetooth function will turn Off and return to main menu screen. Choose
"No" to abort.
buttons.
/ buttons respectively.
button until a "Exit BT Transmission?" dialog appear for
/
/
10
and buttons, then
/ and buttons.
and buttons, the
/
/