dirna Bergstrom bycool green line COMPACT 3.0 Instructions De Montage page 27

COMPACT 3.0
13 Fasten supports tightening nuts until outside
EPDM joint of equipment is compressed,
between 3 and 6 mm;
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with unit
base, as indicated on diagram.
3-6mm.
Cabin roof
Fasten selflocked nut until
13 EPDM gasket is compressed
between 3 and 6 mm.
14 Tighten (4) M8 nuts to support and (4) to Unit
base.
15
Place console using (4) M6/100x15 allen head
screws bolts.
EPDM gasket
10 mm*
(*) (approx. after tightenin
15
Air conditioning for vehicles
Base
Bracket
27
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
15
EN
13
14