Audible Alarm - INFOSEC E4 LCD Pro 1000 Mode D'emploi

Load information
Operation mode information
Battery information
Input & Battery voltage information

3-3. Audible Alarm

Battery Mode
Low Battery
Overload
Fault
Bypass Mode
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 03 17 AA 59 209 09
Indicates the output voltage, frequency or battery voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Indicates the load level by 0-25%, 26-50%, 51-75%, and
76-100%.
Indicates an overload.
Indicates a load or a UPS output short circuit.
Indicates the UPS is connected to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Indicates the Battery level by 0-25%, 26-50%, 51-75%, and
76-100%.
Indicates a battery fault.
Indicates a low battery level and a low battery voltage.
Indicates the input voltage or frequency or battery voltage.
Vac: Input voltage, Vdc: battery voltage, Hz: input frequency
Sounds every 4 seconds
Sounds every second
Sounds twice every second
Sounds continuously
Sounds every 10 seconds
34