Ariston Chaffoteaux 3024151 Installation Et Mode D'emploi page 25

overview
This manual constitutes an integral and
essential part of the product. Read the in-
structions and warnings carefully as they
provide important information on installa-
tion, operation and maintenance safety.
The technical notes and instructions in this
document are provided to help installers
perform the installation process correctly,
in accordance with the best working stand-
ards.
The module is designed for managing so-
lar heating systems. It is strictly forbidden
to use the device for purposes other than
those specifi ed. The manufacturer shall
not be held liable for any damage due to
improper, incorrect or unreasonable use
or due to failure to comply with the indica-
tions outlined in this manual. The installer
must be qualifi ed to install heating devices
for plumbing and sanitary water systems in
accordance with Italian Decree Law 37/08,
and must issue the customer a declaration
of conformity upon completing installation.
Design, installation, maintenance and any
other interventions must be carried out in
full conformity to applicable regulations and
any instructions provided by the manufac-
turer.
Incorrect installation can harm persons or
animals and damage objects; the manufac-
turer shall not be held liable in such cases.
The solar circulation unit is delivered in
cardboard box. After removing all the pack-
aging, make sure that the device is intact
and that no parts are missing. Should this
not be the case, contact the supplier.
Keep all packaging material (clips, plas-
tic bags, expanded polystyrene, etc.) out of
reach of children, as it may be potentially
dangerous.
Before any work is carried out on the mod-
ule, make sure that the power supply is cut
off by turning the external switch to the
"OFF" position.
Any repairs must be carried out by qualifi ed
technicians using original spare parts only.
Failure to comply with the above-mentioned
recommendations may jeopardise the de-
vice's safety and void the manufacturer's li-
ability. When cleaning the external parts of
the device, switch the module off by turning
the external switch to the "OFF" position.
Use a damp cloth soaked in soapy water to
clean the device. Do not use aggressive de-
tergents, insecticides or toxic products.
CE mark
The CE mark guarantees that the device
conforms to the following directives:
- 2004/108/EC
concerning electromagnetic
compatibility
- 2006/95/EC
concerning electrical safety
GB
25