Information On The App "Smart Life - Smart Living; Information On How To Use The App; System Requirement For Use Of The App; Commissioning Via The App - Profi Care PC-LR 3083 Mode D'emploi

Information on the App
"Smart Life - Smart Living"
The Smart Life - Smart Living app is available for android
and iOS. Scan the corresponding QR code to get directly to
the download.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
Google Play

Information on How to Use the App

This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi con-
nection to your router and the free app "Smart Life - Smart
Living".
You can easily access all functions of the appliance via the
app. Since the app constantly improved, we cannot provide
a more detailed description here.
We recommend disconnecting the appliance from the
power supply when you are away from home to prevent
unintentional switching on while you are on the road!

System Requirement for Use of the App

• iOs 9.0 or higher
• Android 4.4 or higher

Commissioning via the App

1. Install the "Smart Life - Smart Living" app. Create a user
account.
2. Activate the Wi-Fi function in the settings of your appli-
ance.
3. Place the appliance within 5 meters of your router.
4. Switch on the appliance using the
5. Press and hold the button for approx. 3 seconds. The
button flashes.
6. Launch the app and select " + ".
7. Select the "Air Purifier" menu and follow the instructions
on the display.
8. Once the appliance has been connected successfully,
the Wi-Fi indicator light will be solid. Now you can
operate the appliance using the app.
NOTE:
The appliance can only be operated with 2.4 GHz routers.
5 GHz routers are not supported.
PC-LR3083_IM_new2_14.01.2021

Disconnecting the Wi-Fi

If you want to disconnect the existing Wi-Fi connection
(control lamp
1. Press and hold the button
2. The Wi-Fi connection will be disconnected and the appli-
ance is removed from the app at the same time.
NOTE:
If you want to re-establish the WLAN connection, proceed
as described in the paragraph "Commissioning via the
App".
NOTE:
App Store
Operation is explained by the buttons on the remote
control.

Switching the Appliance On / Off

• Press the ON / OFF button to switch on the appliance.
Under normal conditions, the appliance basically always
starts in automatic mode and shows the current air quality.
• Press the ON / OFF button again to switch off the appli-
ance or to put it in standby mode. The value PM2.5 is
displayed.

Power Level Selection

Press the SPEED button repeatedly to choose between the
available power levels.
= Power level 1
= Power level 2
= Power level 3
= Power level 4
Press the SPEED button repeatedly until AUTO lights up
in the display. Automatic mode is activated. Depending on
the air quality, the power level in automatic mode will be
automatically adjusted.

Sleep Mode / Power Saving Mode

button.
Press the SLEEP button to enter sleep mode / power
saving mode. The display and the colour ring goes out and
the SLEEP button lights up. The appliance is operating in
power level .

Time-delayed Switch On

You can switch on the appliance in a time-controlled
manner.
NOTE:
This is only possible when the appliance is switched off.
• Use the TIME button to select a time setting between
and
• Upon expiry of the timer the appliance will switch on
automatically.
is lit), proceed as follows:
for about 3 seconds.

Operation

.
49
14.01.21