Femi 640 Mode D'emploi page 17

3 PARTS AND ACCESSORIES
Parts of the tool
1. Dust chute
2. Angle fence
3. Angle fence scale
4. Cutter block guard
5. Planer table
6. Planer cutting depth adjustment
7. Thicknesser table height adjustment
8. Planer scale
9. Front cover
10. Power switch
11. Power cable with power plug
12. Thicknesser table
13. Thicknesser scale
14. Lever of cutter block guard
15. Cutter block
16. Thermal cutout switch
4 TRASPORTATION AND ASSEMBLY
Due to the heaviness of the machine we do not recommend
carrying it alone.
Caution!
Do not carry the machine holding it at the planer
table, as this is not designed to withstand the tensile
load of the machine weight.
• Floor Space Required: min. 3 m x 4 m
• suffi cient load bearing capacity
• level
• even
• dry
• non-slip
• suffi cient ventilation
• Proper power connection
Depending on workpiece dimensions more fl oor space may
be required.
The machine can be installed on a workbench using bolts,
lock washers, and hex nuts (not supplied). (refer to the
fi gure below)
5 PRIOR TO FIRST USE
Model 640
Model PF204
Model 630 / PF150
380
350
350
17