Introduction; Features - Omnitronic LXO-230 Mode D'emploi

OPERATING INSTRUCTIONS
LXO-230
Active crossover
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- include every supplementay update with the original manual

INTRODUCTION

Thank you for having chosen an OMNITRONIC LXO-230. You have acquired a reliable and powerful device.
If you follow the instructions given in this manual, we can assure you that you will enjoy this device for many
years.
Unpack your OMNITRONIC crossover.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

Features

High-quality stereo active crossover
Stereo-2-way or mono 3-way operation possible • Industry standard 24 dB/octave Linkwitz-Riley filter •
Linear and phase stable frequency range • Independent limiter per output with predefined time parameters •
Individual Mute-switches per output for easy comparison • Phase Invers switch per output on the rear panel •
Delay of up to 4ms for the Low-outputs • Individual level control per output • Crossover frequency 80 Hz - 8
kHz • Crossover frequency can be controlled on the front panel • Switchable 30 Hz Low-Cut • Horn-EQ for
Constant-Directivity tweeters switchable • Inputs equipped with RF-filter and Subsonic-filter • XLR inputs and
outputs
17/38 10304060_V_1_0.DOC