Projecting; Projecting The Picture - Sony VPL-HW55ES Mode D'emploi

Projecting

This section describes how to operate the unit to view the picture from the equipment
connected to the unit. It also describes how to adjust the quality of the picture to suit your
taste.

Projecting the Picture

Example: To view the picture
from the video
equipment connected
to the HDMI 1
connector of this unit.
To view the picture from
RGB equipment connected to the INPUT A connector
Component equipment connected to the Y P
Equipment connected to the HDMI 1 connector
Equipment connected to the HDMI 2 connector
Tips
• When "Auto Input Search" is set to "On" in the Function
effective signals are displayed in the input palette.
• When "Status" is set to "Off" in the Setup
the INPUT button to switch between input terminals in sequence.
• When the "Control for HDMI" is set to "On" in the Function
effective signals is automatically displayed, synchronizing with the operation of the equipment
connected to HDMI 1 or HDMI 2 input of the unit. (Only when the connected equipment supports
Control for HDMI compatible.)
1
Power on both the projector and
the equipment connected to the
unit.
2
Press INPUT to display the input
palette on the screen.
3
Select the equipment from
which you want to display
images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment
from which to project.
/C P /C connector
B B R R
menu, only input terminals with
menu, the input palette does not appear. Press of
menu, the input terminal with
Press INPUT to display
Input-A
Component
HDMI 1
HDMI 2
27
GB