Beurer HR 8000 Mode D'emploi page 33

Shaving with the shaver heads
Before you start shaving, make sure that the shaver is charged
(see section "Charging the battery").
1. Make sure that the shaver unit is securely attached to the
device.
2. Remove the shaver head protective cover if it is still attached.
3. Press the ON/OFF switch
battery indicator starts to light up and displays the remaining
battery capacity in percent.
4. Apply light pressure as you move the shaver heads in circular
motions across the areas of the face to be shaved.
5. When you have shaved all the required areas of your face,
switch the shaver off. Press the ON/OFF switch
off the shaver.
6. Clean the shaver heads after every shave using the cleaning
brush provided. For information on thorough cleaning, see
section "9. Cleaning and maintenance".
to switch on the shaver. The
33
to switch