Zibro R 617 E Manuel D'utilisation page 70

4
62
11 Put the wick holder and the wick mechanism back into
position.
12 Screw the four wing nuts hand tight.
13 Place the knurled wick adjustment knob on the wick
mechanism. Turn the knob as far to the right as possi-
ble. Press the off switch. Check that the wick can be
lowered completely. Repeat this check a number of
times. If the wick cannot be lowered completely it has
not been placed correctly. If this is the case, repeat the
procedure from 10.
14 Remove the knurled wick adjustment knob and adjust
the wick position to 1.
15 Put the cabinet back into position and tighten the three
screws. Put the knurled adjustment knob back into posi-
tion. Now put the combustion chamber back into posi-
tion. Check that it is level by sliding it slightly to the left
and the right by its handle. Close the grill.
16 Put the filled removable tank back into position. Put
the batteries into the battery holder (ensure that the
positive and negative poles match the + and – marks
indicated on the battery housing). Wait 30 minutes
after replacing the tank and batteries before using the
heater.