Installing The Heater - Zibro R 617 E Manuel D'utilisation

Masquer les pouces Voir aussi pour R 617 E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
B
Premium Quality Fuels. Only fuels of this kind will ensure clean and proper
burning. Lower quality fuel may result in:
e
increased possibility of malfunctioning
e
incomplete burning
e
reduced heater lifetime
e smoke and/or smells
C
e
deposits on the grid or mantle
U s i n g t h e r i g h t f u e l i s t h e r e f o r e e s s e n t i a l f o r s a f e , e f f i c i e n t , a n d
comfortable use of your heater.
Damage and/or malfunctions of the heater due to the use of other than
high quality water-free pure paraffin oil is not covered by the warranty.
D
Always refer to your local Zibro dealer for the right fuel for your heater.
ManUal
A

INSTALLING THE HEATER

E
1
Carefully remove your heater from the box and check the contents.
In addition to the heater you also need to have:
e a manual fuel pump
e a transportation cap
e a fuel cap cover
e these directions for use
F
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
2
Remove the other packaging materials:
e Remove the packaging material from the grill G. Lift the grill from the slot
(Fig. B) and pull it forward.
e Push the packing material on top of the combustion chamber D slightly
down and remove it (Fig. C). Remove the packaging materials from under
the combustion chamber as well (Fig. D).
e Put the combustion chamber back into its place. The combustion chamber
is positioned correctly when it can be smoothly moved a little to the left
and to the right by its handle E (Fig. E). Close the grill: Slightly lift it to
G
reposition it in its slot.
e Open the lid of the removable tank H and remove the piece of cardboard.
3 Fill the removable tank as indicated in Section B.
4
Insert the batteries into their holder 3 at the back of the heater (Fig. F).
H
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing.
5
The floor should be firm and completely level. Reposition the heater, when it is not
level. Do not correct the situation by placing books or other goods under the heater.
e
e e e e e
4
53

Publicité

Table des Matières
loading

Table des Matières